Manufactured by CHG Bearing, the HWA410HP4 is a precision Thin Section Angular Contact Ball Bearings. Key dimensional parameters include a 15.875 mm bore diameter, a 22.225 mm outer diameter, and a 3.96748 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HWA410HP4 - Thin Section Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HWA410HP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing |
| Series | A4 |
| Seal Type | Open / Single-Sided Sealed / Double-Sided Sealed |
| Load Direction | Combined Radial and Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 15.875 mm |
| Width (B) | 3.96748 mm |
| Outer Diameter (D) | 22.225 mm |
| Bore Diameter Tolerance | -0.005-0 mm |
| Outside Diameter Tolerance | -0.005-0 mm |
| Width Tolerance | -0.025-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 17.99082 mm |
| Outer-Ring Land Diameter (L2 / D1) | 20.10918 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 600 N |
| Basic Dynamic Radial Load Rating Cr (N) | 720 N |
| Basic Static Axial Load Rating C0a (N) | 690 N |
| Basic Dynamic Axial Load Rating Ca (N) | N/A N |
| Material | |
| Mass (kg) | 0.004Kg kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / Polyimide / PEEK / Phenolic Resin / Phenolic Resin Fabric Laminate |
| Ball Material | Ceramic / Stainless Steel / Bearing Steel |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | N/A mm |
HWA410HP4 22.225 mm 15.875 mm 3.96748 mm Frequently Asked Questions about HWA410HP4 Thin Section Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Quality starts with raw material selection: CHG Bearing crafts HWA410HP4 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
For international ocean and air freight, CHG Bearing packs HWA410HP4 with industrial VCI anti-corrosion barrier wrapping, sealed polybags, individual cartons, and fumigated ocean-worthy wooden crates. This multi-layer barrier guarantees rust-free storage for a minimum shelf life of 24 to 36 months.
To match diverse operational dynamics, CHG Bearing supplies HWA410HP4 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
The CHG Bearing HWA410HP4 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
