Manufactured by CHG Bearing, the HKC110AP0 is a precision Thin Section Angular Contact Ball Bearings. Key dimensional parameters include a 279.4 mm bore diameter, a 298.45 mm outer diameter, and a 9.525 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKC110AP0 - Thin Section Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKC110AP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing |
| Series | KC |
| Seal Type | Open |
| Load Direction | Combined Radial and Unidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 279.4 mm |
| Width (B) | 9.525 mm |
| Outer Diameter (D) | 298.45 mm |
| Bore Diameter Tolerance | -0.035-0 mm |
| Outside Diameter Tolerance | -0.035-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 286.4358 mm |
| Outer-Ring Land Diameter (L2 / D1) | 291.4142 mm |
| Counterbore Diameter L3 | 293.1668 mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 29870 N |
| Basic Dynamic Radial Load Rating Cr (N) | 9100 N |
| Basic Static Axial Load Rating C0a (N) | 86190 N |
| Basic Dynamic Axial Load Rating Ca (N) | 23470 N |
| Material | |
| Mass (kg) | 0.517 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | N/A mm |
HKC110AP0 298.45 mm 279.4 mm 9.525 mm Frequently Asked Questions about HKC110AP0 Thin Section Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Open), CHG Bearing pre-charges HKC110AP0 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To extend the trouble-free lifespan of CHG Bearing HKC110AP0, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
To ensure optimum performance of CHG Bearing HKC110AP0 Thin Section Angular Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 279.4 mm bore. For the 298.45 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Each HKC110AP0 produced in CHG Bearing manufacturing facilities features accurately profiled corner chamfers complying with DIN 5412 / ISO standard corner radii. When designing mating shafts and housing shoulders, machining an undercut or fillet radius strictly within the inner ring clearance limit (279.4 mm bore side) ensures perfect planar contact without edge binding.
