Manufactured by CHG Bearing, the HKC045AP0 is a precision Thin Section Angular Contact Ball Bearings. Key dimensional parameters include a 114.3 mm bore diameter, a 133.35 mm outer diameter, and a 9.525 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKC045AP0 - Thin Section Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKC045AP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing |
| Series | KC |
| Seal Type | Open |
| Load Direction | Combined Radial and Unidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 114.3 mm |
| Width (B) | 9.525 mm |
| Outer Diameter (D) | 133.35 mm |
| Bore Diameter Tolerance | -0.02-0 mm |
| Outside Diameter Tolerance | -0.02-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 121.3358 mm |
| Outer-Ring Land Diameter (L2 / D1) | 126.3142 mm |
| Counterbore Diameter L3 | 128.3208 mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 12710 N |
| Basic Dynamic Radial Load Rating Cr (N) | 5490 N |
| Basic Static Axial Load Rating C0a (N) | 36760 N |
| Basic Dynamic Axial Load Rating Ca (N) | 13290 N |
| Material | |
| Mass (kg) | 0.222 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | N/A mm |
HKC045AP0 133.35 mm 114.3 mm 9.525 mm Frequently Asked Questions about HKC045AP0 Thin Section Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Open), CHG Bearing pre-charges HKC045AP0 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
As standard production, CHG Bearing subjects HKC045AP0 to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
The CHG Bearing HKC045AP0 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Built for demanding industrial environments, the HKC045AP0 Thin Section Angular Contact Ball Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
