Manufactured by CHG Bearing, the HKA110AP0 is a precision Thin Section Angular Contact Ball Bearings. Key dimensional parameters include a 279.4 mm bore diameter, a 292.1 mm outer diameter, and a 6.35 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKA110AP0 - Thin Section Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKA110AP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing |
| Series | KA |
| Seal Type | Open |
| Load Direction | Combined Radial and Unidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 279.4 mm |
| Width (B) | 6.35 mm |
| Outer Diameter (D) | 292.1 mm |
| Bore Diameter Tolerance | -0.035-0 mm |
| Outside Diameter Tolerance | -0.035-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 284.1244 mm |
| Outer-Ring Land Diameter (L2 / D1) | 287.3756 mm |
| Counterbore Diameter L3 | 288.3662 mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 17510 N |
| Basic Dynamic Radial Load Rating Cr (N) | 4770 N |
| Basic Static Axial Load Rating C0a (N) | 50580 N |
| Basic Dynamic Axial Load Rating Ca (N) | 12490 N |
| Material | |
| Mass (kg) | 0.227 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | N/A mm |
HKA110AP0 292.1 mm 279.4 mm 6.35 mm Frequently Asked Questions about HKA110AP0 Thin Section Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To ensure optimum performance of CHG Bearing HKA110AP0 Thin Section Angular Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 279.4 mm bore. For the 292.1 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
The CHG Bearing HKA110AP0 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Built for demanding industrial environments, the HKA110AP0 Thin Section Angular Contact Ball Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
To extend the trouble-free lifespan of CHG Bearing HKA110AP0, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
