Manufactured by CHG Bearing, the HKA080AP0 is a precision Thin Section Angular Contact Ball Bearings. Key dimensional parameters include a 203.2 mm bore diameter, a 215.9 mm outer diameter, and a 6.35 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKA080AP0 - Thin Section Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKA080AP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing |
| Series | KA |
| Seal Type | Open |
| Load Direction | Combined Radial and Unidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 203.2 mm |
| Width (B) | 6.35 mm |
| Outer Diameter (D) | 215.9 mm |
| Bore Diameter Tolerance | -0.03-0 mm |
| Outside Diameter Tolerance | -0.03-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 207.9244 mm |
| Outer-Ring Land Diameter (L2 / D1) | 211.1756 mm |
| Counterbore Diameter L3 | 212.3186 mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 12850 N |
| Basic Dynamic Radial Load Rating Cr (N) | 3960 N |
| Basic Static Axial Load Rating C0a (N) | 37120 N |
| Basic Dynamic Axial Load Rating Ca (N) | 10140 N |
| Material | |
| Mass (kg) | 0.163 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | N/A mm |
HKA080AP0 215.9 mm 203.2 mm 6.35 mm Frequently Asked Questions about HKA080AP0 Thin Section Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Each HKA080AP0 produced in CHG Bearing manufacturing facilities features accurately profiled corner chamfers complying with DIN 5412 / ISO standard corner radii. When designing mating shafts and housing shoulders, machining an undercut or fillet radius strictly within the inner ring clearance limit (203.2 mm bore side) ensures perfect planar contact without edge binding.
When fitting HKA080AP0 over a 203.2 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
Every production batch of CHG Bearing HKA080AP0 Thin Section Angular Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
Model HKA080AP0 is manufactured by CHG Bearing in standard Normal clearance (CN) for ambient temperature transmission, and C3 or C4 clearance for heavy duty applications. C3 clearance compensates for radial shrinkage caused by tight shaft press-fits (bore 203.2 mm) and steep thermal gradients between inner and outer rings.
