Manufactured by CHG Bearing, the HWAA24128HP4 is a precision Super Duplex Angular Contact Ball Bearings. Key dimensional parameters include a 203.2 mm bore diameter, a 241.3 mm outer diameter, and a 38.1 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HWAA24128HP4 - Super Duplex Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HWAA24128HP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super Duplex Angular Contact Ball Bearing |
| Series | AA24 |
| Seal Type | Open / Single-Sided Sealed / Double-Sided Sealed |
| Load Direction | Combined Radial and Axial |
| Row Configuration | Double Row |
| Dimensions | |
| Bore Diameter (d) | 203.2 mm |
| Width (B) | 38.1 mm |
| Outer Diameter (D) | 241.3 mm |
| Outside Diameter Tolerance | -0.015-0 mm |
| Width Tolerance | -0.5-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 216.32926 mm |
| Outer-Ring Land Diameter (L2 / D1) | 228.17 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 150800 N |
| Basic Dynamic Radial Load Rating Cr (N) | 53600 N |
| Basic Static Axial Load Rating C0a (N) | 80500 N |
| Basic Dynamic Axial Load Rating Ca (N) | N/A N |
| Material | |
| Mass (kg) | 2.74Kg kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / Polyimide / PEEK / Phenolic Resin / Phenolic Resin Fabric Laminate |
| Ball Material | Ceramic / Stainless Steel / Bearing Steel |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | N/A mm |
HWAA24128HP4 241.3 mm 203.2 mm 38.1 mm 228.17 mm 216.32926 mm Frequently Asked Questions about HWAA24128HP4 Super Duplex Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The Open / Single-Sided Sealed / Double-Sided Sealed engineered for HWAA24128HP4 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
To ensure optimum performance of CHG Bearing HWAA24128HP4 Super Duplex Angular Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 203.2 mm bore. For the 241.3 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Quality starts with raw material selection: CHG Bearing crafts HWAA24128HP4 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
In its sealed configuration (Open / Single-Sided Sealed / Double-Sided Sealed), CHG Bearing pre-charges HWAA24128HP4 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
