Manufactured by CHG Bearing, the HWAA1676HP4 is a precision Super Duplex Angular Contact Ball Bearings. Key dimensional parameters include a 120.65 mm bore diameter, a 146.05 mm outer diameter, and a 25.4 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HWAA1676HP4 - Super Duplex Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HWAA1676HP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super Duplex Angular Contact Ball Bearing |
| Series | AA16 |
| Seal Type | Open / Single-Sided Sealed / Double-Sided Sealed |
| Load Direction | Combined Radial and Axial |
| Row Configuration | Double Row |
| Dimensions | |
| Bore Diameter (d) | 120.65 mm |
| Width (B) | 25.4 mm |
| Outer Diameter (D) | 146.05 mm |
| Outside Diameter Tolerance | -0.01-0 mm |
| Width Tolerance | -0.5-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 129.4003 mm |
| Outer-Ring Land Diameter (L2 / D1) | 137.3 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 59200 N |
| Basic Dynamic Radial Load Rating Cr (N) | 24600 N |
| Basic Static Axial Load Rating C0a (N) | 31400 N |
| Basic Dynamic Axial Load Rating Ca (N) | N/A N |
| Material | |
| Mass (kg) | 0.724Kg kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / Polyimide / PEEK / Phenolic Resin / Phenolic Resin Fabric Laminate |
| Ball Material | Ceramic / Stainless Steel / Bearing Steel |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | N/A mm |
HWAA1676HP4 146.05 mm 120.65 mm 25.4 mm 137.3 mm 129.4003 mm Frequently Asked Questions about HWAA1676HP4 Super Duplex Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
When fitting HWAA1676HP4 over a 120.65 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To extend the trouble-free lifespan of CHG Bearing HWAA1676HP4, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
To match diverse operational dynamics, CHG Bearing supplies HWAA1676HP4 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
Yes, 100% of HWAA1676HP4 Super Duplex Angular Contact Ball Bearings leaving CHG Bearing production lines are subjected to multi-frequency Anderometer sound testing. All units satisfy baseline Z1V1 levels, with dedicated quiet-running electric motor quality (EMQ) lots certified to Z2V2 and Z3V3 standards for silent machinery integration.
