Manufactured by CHG Bearing, the HWAA1048HP4 is a precision Super Duplex Angular Contact Ball Bearings. Key dimensional parameters include a 76.2 mm bore diameter, a 92.075 mm outer diameter, and a 15.875 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HWAA1048HP4 - Super Duplex Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HWAA1048HP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super Duplex Angular Contact Ball Bearing |
| Series | AA10 |
| Seal Type | Open / Single-Sided Sealed / Double-Sided Sealed |
| Load Direction | Combined Radial and Axial |
| Row Configuration | Double Row |
| Dimensions | |
| Bore Diameter (d) | 76.2 mm |
| Width (B) | 15.875 mm |
| Outer Diameter (D) | 92.075 mm |
| Outside Diameter Tolerance | -0.01-0 mm |
| Width Tolerance | -0.38-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 81.67116 mm |
| Outer-Ring Land Diameter (L2 / D1) | 86.6 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 23100 N |
| Basic Dynamic Radial Load Rating Cr (N) | 10500 N |
| Basic Static Axial Load Rating C0a (N) | 12200 N |
| Basic Dynamic Axial Load Rating Ca (N) | N/A N |
| Material | |
| Mass (kg) | 0.179Kg kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / Polyimide / PEEK / Phenolic Resin / Phenolic Resin Fabric Laminate |
| Ball Material | Ceramic / Stainless Steel / Bearing Steel |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | N/A mm |
HWAA1048HP4 92.075 mm 76.2 mm 15.875 mm 86.6 mm 81.67116 mm Frequently Asked Questions about HWAA1048HP4 Super Duplex Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To ensure optimum performance of CHG Bearing HWAA1048HP4 Super Duplex Angular Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 76.2 mm bore. For the 92.075 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Yes, CHG Bearing works closely with industrial OEMs and brand distributors. We offer turnkey custom engineering for HWAA1048HP4, including laser-etched customer logos, custom internal radial clearances, specialized grease formulations, and bespoke protective packaging.
In its sealed configuration (Open / Single-Sided Sealed / Double-Sided Sealed), CHG Bearing pre-charges HWAA1048HP4 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
The CHG Bearing HWAA1048HP4 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
