Manufactured by CHG Bearing, the HKG200XP0 is a precision Thin Section Four-Point Contact Ball Bearings. Key dimensional parameters include a 508 mm bore diameter, a 558.8 mm outer diameter, and a 25.4 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKG200XP0 - Thin Section Four-Point Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKG200XP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Four-Point Contact Ball Bearing |
| Series | KG |
| Seal Type | Open |
| Load Direction | Radial, Bidirectional Axial and Moment |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 508 mm |
| Width (B) | 25.4 mm |
| Outer Diameter (D) | 558.8 mm |
| Bore Diameter Tolerance | -0.045-0 mm |
| Outside Diameter Tolerance | -0.045-0 mm |
| Width Tolerance | -0.254-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 526.8468 mm |
| Outer-Ring Land Diameter (L2 / D1) | 539.9532 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 153220 N |
| Basic Dynamic Radial Load Rating Cr (N) | 76870 N |
| Basic Static Axial Load Rating C0a (N) | 383070 N |
| Basic Dynamic Axial Load Rating Ca (N) | 130240 N |
| Material | |
| Mass (kg) | 7.53 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | -0.116-0.092 mm |
HKG200XP0 558.8 mm 508 mm 25.4 mm Frequently Asked Questions about HKG200XP0 Thin Section Four-Point Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Following standard ISO 281 fatigue calculation guidelines, the nominal rating life (L10) of CHG Bearing HKG200XP0 correlates its dynamic capacity (standard dynamic) with equivalent dynamic loads. In controlled industrial settings with proper contamination-free filtration, field data confirms continuous operational longevity exceeding 20,000 to 50,000 service hours.
Quality starts with raw material selection: CHG Bearing crafts HKG200XP0 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
Every production batch of CHG Bearing HKG200XP0 Thin Section Four-Point Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
The CHG Bearing HKG200XP0 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
