Manufactured by CHG Bearing, the HKG080XP0 is a precision Thin Section Four-Point Contact Ball Bearings. Key dimensional parameters include a 203.2 mm bore diameter, a 254 mm outer diameter, and a 25.4 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKG080XP0 - Thin Section Four-Point Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKG080XP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Four-Point Contact Ball Bearing |
| Series | KG |
| Seal Type | Open |
| Load Direction | Radial, Bidirectional Axial and Moment |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 203.2 mm |
| Width (B) | 25.4 mm |
| Outer Diameter (D) | 254 mm |
| Bore Diameter Tolerance | -0.03-0 mm |
| Outside Diameter Tolerance | -0.03-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 222.0468 mm |
| Outer-Ring Land Diameter (L2 / D1) | 235.1532 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 65650 N |
| Basic Dynamic Radial Load Rating Cr (N) | 48370 N |
| Basic Static Axial Load Rating C0a (N) | 164200 N |
| Basic Dynamic Axial Load Rating Ca (N) | 74010 N |
| Material | |
| Mass (kg) | 3 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | -0.086-0.061 mm |
HKG080XP0 254 mm 203.2 mm 25.4 mm Frequently Asked Questions about HKG080XP0 Thin Section Four-Point Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Every production batch of CHG Bearing HKG080XP0 Thin Section Four-Point Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
To match diverse operational dynamics, CHG Bearing supplies HKG080XP0 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
Sourcing HKG080XP0 directly from CHG Bearing eliminates intermediate brokerage markups while granting you factory-direct engineering backup, rigorous ISO-certified quality assurance, competitive volume wholesale pricing, and dependable supply chain stability for Thin Section Four-Point Contact Ball Bearings.
When fitting HKG080XP0 over a 203.2 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
