Manufactured by CHG Bearing, the HKF180XP0 is a precision Thin Section Four-Point Contact Ball Bearings. Key dimensional parameters include a 457.2 mm bore diameter, a 495.3 mm outer diameter, and a 19.05 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKF180XP0 - Thin Section Four-Point Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKF180XP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Four-Point Contact Ball Bearing |
| Series | KF |
| Seal Type | Open |
| Load Direction | Radial, Bidirectional Axial and Moment |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 457.2 mm |
| Width (B) | 19.05 mm |
| Outer Diameter (D) | 495.3 mm |
| Bore Diameter Tolerance | -0.04-0 mm |
| Outside Diameter Tolerance | -0.04-0 mm |
| Width Tolerance | -0.254-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 471.297 mm |
| Outer-Ring Land Diameter (L2 / D1) | 481.203 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 94060 N |
| Basic Dynamic Radial Load Rating Cr (N) | 44580 N |
| Basic Static Axial Load Rating C0a (N) | 235140 N |
| Basic Dynamic Axial Load Rating Ca (N) | 75830 N |
| Material | |
| Mass (kg) | 3.58 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | -0.106-0.082 mm |
HKF180XP0 495.3 mm 457.2 mm 19.05 mm Frequently Asked Questions about HKF180XP0 Thin Section Four-Point Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
When fitting HKF180XP0 over a 457.2 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
As a primary manufacturer, CHG Bearing supports both trial batch evaluations and container-load supply for HKF180XP0. Standard catalog sizes are stocked for rapid 3–7 day dispatch, while high-volume OEM production runs typically dispatch within 30–45 days.
Built for demanding industrial environments, the HKF180XP0 Thin Section Four-Point Contact Ball Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
To extend the trouble-free lifespan of CHG Bearing HKF180XP0, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
