Manufactured by CHG Bearing, the HKD065XP4 is a precision Thin Section Four-Point Contact Ball Bearings. Key dimensional parameters include a 165.1 mm bore diameter, a 190.5 mm outer diameter, and a 12.7 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKD065XP4 - Thin Section Four-Point Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKD065XP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Four-Point Contact Ball Bearing |
| Series | KD |
| Seal Type | Open |
| Load Direction | Radial, Bidirectional Axial and Moment |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 165.1 mm |
| Width (B) | 12.7 mm |
| Outer Diameter (D) | 190.5 mm |
| Bore Diameter Tolerance | -0.0076-0 mm |
| Outside Diameter Tolerance | -0.01-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 174.498 mm |
| Outer-Ring Land Diameter (L2 / D1) | 181.102 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 21290 N |
| Basic Dynamic Radial Load Rating Cr (N) | 13250 N |
| Basic Static Axial Load Rating C0a (N) | 53210 N |
| Basic Dynamic Axial Load Rating Ca (N) | 20980 N |
| Material | |
| Mass (kg) | 0.566 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | -0.035-0.021 mm |
HKD065XP4 190.5 mm 165.1 mm 12.7 mm Frequently Asked Questions about HKD065XP4 Thin Section Four-Point Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
When fitting HKD065XP4 over a 165.1 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To extend the trouble-free lifespan of CHG Bearing HKD065XP4, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
To safeguard CHG Bearing HKD065XP4 against fretting wear and false brinelling during transport or vibration, assemble mating surfaces (165.1 mm x 190.5 mm) using anti-fretting mounting paste. Maintaining strict alignment and avoiding prolonged static vibration will preserve raceway polish.
As standard production, CHG Bearing subjects HKD065XP4 to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
