Manufactured by CHG Bearing, the HKC050XP0 is a precision Thin Section Four-Point Contact Ball Bearings. Key dimensional parameters include a 127 mm bore diameter, a 146.05 mm outer diameter, and a 9.525 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKC050XP0 - Thin Section Four-Point Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKC050XP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Four-Point Contact Ball Bearing |
| Series | KC |
| Seal Type | Open |
| Load Direction | Radial, Bidirectional Axial and Moment |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 127 mm |
| Width (B) | 9.525 mm |
| Outer Diameter (D) | 146.05 mm |
| Bore Diameter Tolerance | -0.025-0 mm |
| Outside Diameter Tolerance | -0.02-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 134.0358 mm |
| Outer-Ring Land Diameter (L2 / D1) | 139.0142 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 11510 N |
| Basic Dynamic Radial Load Rating Cr (N) | 7110 N |
| Basic Static Axial Load Rating C0a (N) | 28720 N |
| Basic Dynamic Axial Load Rating Ca (N) | 11290 N |
| Material | |
| Mass (kg) | 0.263 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | -0.076-0.051 mm |
HKC050XP0 146.05 mm 127 mm 9.525 mm Frequently Asked Questions about HKC050XP0 Thin Section Four-Point Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
As a primary manufacturer, CHG Bearing supports both trial batch evaluations and container-load supply for HKC050XP0. Standard catalog sizes are stocked for rapid 3–7 day dispatch, while high-volume OEM production runs typically dispatch within 30–45 days.
Beyond standard alloy steel, CHG Bearing can customize the HKC050XP0 Thin Section Four-Point Contact Ball Bearings using AISI 440C stainless steel, black oxide coating, zinc-nickel plating, or hybrid ceramic (Si3N4) balls for applications involving chemical exposure, marine salt fog, or galvanic current hazards.
When fitting HKC050XP0 over a 127 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
Every production batch of CHG Bearing HKC050XP0 Thin Section Four-Point Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
