Manufactured by CHG Bearing, the HKA040XP0 is a precision Thin Section Four-Point Contact Ball Bearings. Key dimensional parameters include a 101.6 mm bore diameter, a 114.3 mm outer diameter, and a 6.35 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKA040XP0 - Thin Section Four-Point Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKA040XP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Four-Point Contact Ball Bearing |
| Series | KA |
| Seal Type | Open |
| Load Direction | Radial, Bidirectional Axial and Moment |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 101.6 mm |
| Width (B) | 6.35 mm |
| Outer Diameter (D) | 114.3 mm |
| Bore Diameter Tolerance | -0.02-0 mm |
| Outside Diameter Tolerance | -0.015-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 106.3244 mm |
| Outer-Ring Land Diameter (L2 / D1) | 109.5756 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 5730 N |
| Basic Dynamic Radial Load Rating Cr (N) | 3360 N |
| Basic Static Axial Load Rating C0a (N) | 14610 N |
| Basic Dynamic Axial Load Rating Ca (N) | 5380 N |
| Material | |
| Mass (kg) | 0.09 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | -0.066-0.041 mm |
HKA040XP0 114.3 mm 101.6 mm 6.35 mm Frequently Asked Questions about HKA040XP0 Thin Section Four-Point Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Sourcing HKA040XP0 directly from CHG Bearing eliminates intermediate brokerage markups while granting you factory-direct engineering backup, rigorous ISO-certified quality assurance, competitive volume wholesale pricing, and dependable supply chain stability for Thin Section Four-Point Contact Ball Bearings.
To ensure optimum performance of CHG Bearing HKA040XP0 Thin Section Four-Point Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 101.6 mm bore. For the 114.3 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
As standard production, CHG Bearing subjects HKA040XP0 to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
In its sealed configuration (Open), CHG Bearing pre-charges HKA040XP0 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
