Manufactured by CHG Bearing, the HJG120XP0 is a precision Thin Section Four-Point Contact Ball Bearings. Key dimensional parameters include a 304.8 mm bore diameter, a 355.6 mm outer diameter, and a 25.4 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HJG120XP0 - Thin Section Four-Point Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HJG120XP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Four-Point Contact Ball Bearing |
| Series | JG |
| Seal Type | Sealed |
| Load Direction | Radial, Bidirectional Axial and Moment |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 304.8 mm |
| Width (B) | 25.4 mm |
| Outer Diameter (D) | 355.6 mm |
| Bore Diameter Tolerance | -0.035-0 mm |
| Outside Diameter Tolerance | -0.035-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 318.8716 mm |
| Outer-Ring Land Diameter (L2 / D1) | 345.4908 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 94860 N |
| Basic Dynamic Radial Load Rating Cr (N) | 59190 N |
| Basic Static Axial Load Rating C0a (N) | 237140 N |
| Basic Dynamic Axial Load Rating Ca (N) | 94590 N |
| Material | |
| Mass (kg) | 4.218 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | -0.096-0.072 mm |
HJG120XP0 355.6 mm 304.8 mm 25.4 mm Frequently Asked Questions about HJG120XP0 Thin Section Four-Point Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The Sealed engineered for HJG120XP0 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
Following standard ISO 281 fatigue calculation guidelines, the nominal rating life (L10) of CHG Bearing HJG120XP0 correlates its dynamic capacity (standard dynamic) with equivalent dynamic loads. In controlled industrial settings with proper contamination-free filtration, field data confirms continuous operational longevity exceeding 20,000 to 50,000 service hours.
When fitting HJG120XP0 over a 304.8 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
Beyond standard alloy steel, CHG Bearing can customize the HJG120XP0 Thin Section Four-Point Contact Ball Bearings using AISI 440C stainless steel, black oxide coating, zinc-nickel plating, or hybrid ceramic (Si3N4) balls for applications involving chemical exposure, marine salt fog, or galvanic current hazards.
