Manufactured by CHG Bearing, the HJA025XP0 is a precision Thin Section Four-Point Contact Ball Bearings. Key dimensional parameters include a 63.5 mm bore diameter, a 76.2 mm outer diameter, and a 6.35 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HJA025XP0 - Thin Section Four-Point Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HJA025XP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Four-Point Contact Ball Bearing |
| Series | JA |
| Seal Type | Sealed |
| Load Direction | Radial, Bidirectional Axial and Moment |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 63.5 mm |
| Width (B) | 6.35 mm |
| Outer Diameter (D) | 76.2 mm |
| Bore Diameter Tolerance | -0.015-0 mm |
| Outside Diameter Tolerance | -0.0127-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 67.2592 mm |
| Outer-Ring Land Diameter (L2 / D1) | 72.5424 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 3690 N |
| Basic Dynamic Radial Load Rating Cr (N) | 2590 N |
| Basic Static Axial Load Rating C0a (N) | 9290 N |
| Basic Dynamic Axial Load Rating Ca (N) | 4050 N |
| Material | |
| Mass (kg) | 0.054 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | -0.055-0.031 mm |
HJA025XP0 76.2 mm 63.5 mm 6.35 mm Frequently Asked Questions about HJA025XP0 Thin Section Four-Point Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Yes, CHG Bearing works closely with industrial OEMs and brand distributors. We offer turnkey custom engineering for HJA025XP0, including laser-etched customer logos, custom internal radial clearances, specialized grease formulations, and bespoke protective packaging.
To match diverse operational dynamics, CHG Bearing supplies HJA025XP0 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
In its sealed configuration (Sealed), CHG Bearing pre-charges HJA025XP0 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
The CHG Bearing HJA025XP0 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
