Manufactured by CHG Bearing, the HKG075CP4 is a precision Thin Section Deep Groove Ball Bearings. Key dimensional parameters include a 190.5 mm bore diameter, a 241.3 mm outer diameter, and a 25.4 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKG075CP4 - Thin Section Deep Groove Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKG075CP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Series | KG |
| Seal Type | Open |
| Load Direction | Radial and Bidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 190.5 mm |
| Width (B) | 25.4 mm |
| Outer Diameter (D) | 241.3 mm |
| Bore Diameter Tolerance | -0.01-0 mm |
| Outside Diameter Tolerance | -0.01-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 209.3468 mm |
| Outer-Ring Land Diameter (L2 / D1) | 222.4532 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 60810 N |
| Basic Dynamic Radial Load Rating Cr (N) | 35170 N |
| Basic Static Axial Load Rating C0a (N) | N/A N |
| Basic Dynamic Axial Load Rating Ca (N) | N/A N |
| Material | |
| Mass (kg) | 2.83 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | -0.035-0.021 mm |
HKG075CP4 241.3 mm 190.5 mm 25.4 mm Frequently Asked Questions about HKG075CP4 Thin Section Deep Groove Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Every production batch of CHG Bearing HKG075CP4 Thin Section Deep Groove Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
When fitting HKG075CP4 over a 190.5 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
The CHG Bearing HKG075CP4 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Built for demanding industrial environments, the HKG075CP4 Thin Section Deep Groove Ball Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
