Manufactured by CHG Bearing, the HKC100CP0 is a precision Thin Section Deep Groove Ball Bearings. Key dimensional parameters include a 254 mm bore diameter, a 273.05 mm outer diameter, and a 9.525 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKC100CP0 - Thin Section Deep Groove Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKC100CP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Series | KC |
| Seal Type | Open |
| Load Direction | Radial and Bidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 254 mm |
| Width (B) | 9.525 mm |
| Outer Diameter (D) | 273.05 mm |
| Bore Diameter Tolerance | -0.035-0 mm |
| Outside Diameter Tolerance | -0.035-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 261.0358 mm |
| Outer-Ring Land Diameter (L2 / D1) | 266.0142 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 22180 N |
| Basic Dynamic Radial Load Rating Cr (N) | 7920 N |
| Basic Static Axial Load Rating C0a (N) | N/A N |
| Basic Dynamic Axial Load Rating Ca (N) | N/A N |
| Material | |
| Mass (kg) | 0.481 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | -0.121-0.072 mm |
HKC100CP0 273.05 mm 254 mm 9.525 mm Frequently Asked Questions about HKC100CP0 Thin Section Deep Groove Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To ensure optimum performance of CHG Bearing HKC100CP0 Thin Section Deep Groove Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 254 mm bore. For the 273.05 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
To extend the trouble-free lifespan of CHG Bearing HKC100CP0, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
The CHG Bearing HKC100CP0 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Every production batch of CHG Bearing HKC100CP0 Thin Section Deep Groove Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
