Manufactured by CHG Bearing, the HKB140CP0 is a precision Thin Section Deep Groove Ball Bearings. Key dimensional parameters include a 355.6 mm bore diameter, a 371.475 mm outer diameter, and a 7.9375 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKB140CP0 - Thin Section Deep Groove Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKB140CP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Series | KB |
| Seal Type | Open |
| Load Direction | Radial and Bidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 355.6 mm |
| Width (B) | 7.9375 mm |
| Outer Diameter (D) | 371.475 mm |
| Bore Diameter Tolerance | -0.04-0 mm |
| Outside Diameter Tolerance | -0.04-0 mm |
| Width Tolerance | -0.254-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 361.4674 mm |
| Outer-Ring Land Diameter (L2 / D1) | 365.5822 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 25830 N |
| Basic Dynamic Radial Load Rating Cr (N) | 7470 N |
| Basic Static Axial Load Rating C0a (N) | N/A N |
| Basic Dynamic Axial Load Rating Ca (N) | N/A N |
| Material | |
| Mass (kg) | 0.476 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | -0.132-0.082 mm |
HKB140CP0 371.475 mm 355.6 mm 7.9375 mm Frequently Asked Questions about HKB140CP0 Thin Section Deep Groove Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To safeguard CHG Bearing HKB140CP0 against fretting wear and false brinelling during transport or vibration, assemble mating surfaces (355.6 mm x 371.475 mm) using anti-fretting mounting paste. Maintaining strict alignment and avoiding prolonged static vibration will preserve raceway polish.
To ensure optimum performance of CHG Bearing HKB140CP0 Thin Section Deep Groove Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 355.6 mm bore. For the 371.475 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
The Open engineered for HKB140CP0 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
The CHG Bearing HKB140CP0 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
