Manufactured by CHG Bearing, the HKA110CP0 is a precision Thin Section Deep Groove Ball Bearings. Key dimensional parameters include a 279.4 mm bore diameter, a 292.1 mm outer diameter, and a 6.35 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKA110CP0 - Thin Section Deep Groove Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKA110CP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Series | KA |
| Seal Type | Open |
| Load Direction | Radial and Bidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 279.4 mm |
| Width (B) | 6.35 mm |
| Outer Diameter (D) | 292.1 mm |
| Bore Diameter Tolerance | -0.035-0 mm |
| Outside Diameter Tolerance | -0.035-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 284.1244 mm |
| Outer-Ring Land Diameter (L2 / D1) | 287.3756 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 15160 N |
| Basic Dynamic Radial Load Rating Cr (N) | 4560 N |
| Basic Static Axial Load Rating C0a (N) | N/A N |
| Basic Dynamic Axial Load Rating Ca (N) | N/A N |
| Material | |
| Mass (kg) | 0.236 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | -0.121-0.072 mm |
HKA110CP0 292.1 mm 279.4 mm 6.35 mm Frequently Asked Questions about HKA110CP0 Thin Section Deep Groove Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Quality starts with raw material selection: CHG Bearing crafts HKA110CP0 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
In its sealed configuration (Open), CHG Bearing pre-charges HKA110CP0 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To ensure optimum performance of CHG Bearing HKA110CP0 Thin Section Deep Groove Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 279.4 mm bore. For the 292.1 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Following standard ISO 281 fatigue calculation guidelines, the nominal rating life (L10) of CHG Bearing HKA110CP0 correlates its dynamic capacity (standard dynamic) with equivalent dynamic loads. In controlled industrial settings with proper contamination-free filtration, field data confirms continuous operational longevity exceeding 20,000 to 50,000 service hours.
