Manufactured by CHG Bearing, the HJG200CP0 is a precision Thin Section Deep Groove Ball Bearings. Key dimensional parameters include a 508 mm bore diameter, a 558.8 mm outer diameter, and a 25.4 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HJG200CP0 - Thin Section Deep Groove Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HJG200CP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Series | JG |
| Seal Type | Sealed |
| Load Direction | Radial and Bidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 508 mm |
| Width (B) | 25.4 mm |
| Outer Diameter (D) | 558.8 mm |
| Bore Diameter Tolerance | -0.05-0 mm |
| Outside Diameter Tolerance | -0.05-0 mm |
| Width Tolerance | -0.254-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 522.0716 mm |
| Outer-Ring Land Diameter (L2 / D1) | 548.6908 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 153220 N |
| Basic Dynamic Radial Load Rating Cr (N) | 57980 N |
| Basic Static Axial Load Rating C0a (N) | N/A N |
| Basic Dynamic Axial Load Rating Ca (N) | N/A N |
| Material | |
| Mass (kg) | 7.167 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | -0.152-0.102 mm |
HJG200CP0 558.8 mm 508 mm 25.4 mm Frequently Asked Questions about HJG200CP0 Thin Section Deep Groove Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
When fitting HJG200CP0 over a 508 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To match diverse operational dynamics, CHG Bearing supplies HJG200CP0 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
As standard production, CHG Bearing subjects HJG200CP0 to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
To ensure optimum performance of CHG Bearing HJG200CP0 Thin Section Deep Groove Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 508 mm bore. For the 558.8 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
