Manufactured by CHG Bearing, the S71920 ACD/P4ATBTB is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 100 mm bore diameter, a 140 mm outer diameter, and a 60 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
S71920 ACD/P4ATBTB - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | S71920 ACD/P4ATBTB |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Seal Type | Non-contact Seal |
| Number of Rows | 3 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-capacity D Design |
| Universally Matchable | No |
| Number of Bearings in Set | 3 |
| Axial Clearance / Preload | Light Preload |
| Tolerance Class | P4A |
| Bearing Material | Bearing Steel |
| Sealing | Sealed on Both Sides |
| Lubricant | Grease |
| Dimensions | |
| Bore Diameter (d) | 100 mm |
| Width (B) | 60 mm |
| Outer Diameter (D) | 140 mm |
| Contact Angle α (°) | 25 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 124 kN |
| Basic Static Load Rating C₀ (kN) | 190 kN |
| Material | |
| Weight (kg) | 2.42 kg |
S71920 ACD/P4ATBTB 140 mm 100 mm 60 mm Frequently Asked Questions about S71920 ACD/P4ATBTB Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
As standard production, CHG Bearing subjects S71920 ACD/P4ATBTB to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
When fitting S71920 ACD/P4ATBTB over a 100 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To safeguard CHG Bearing S71920 ACD/P4ATBTB against fretting wear and false brinelling during transport or vibration, assemble mating surfaces (100 mm x 140 mm) using anti-fretting mounting paste. Maintaining strict alignment and avoiding prolonged static vibration will preserve raceway polish.
The CHG Bearing S71920 ACD/P4ATBTB is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
