Manufactured by CHG Bearing, the S71918 ACD/P4ADBA is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 90 mm bore diameter, a 125 mm outer diameter, and a 36 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
S71918 ACD/P4ADBA - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | S71918 ACD/P4ADBA |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Seal Type | Non-contact Seal |
| Number of Rows | 2 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-capacity D Design |
| Universally Matchable | No |
| Matched Arrangement | Back-to-back (DB) |
| Number of Bearings in Set | 2 |
| Axial Clearance / Preload | Extra-light Preload |
| Tolerance Class | P4A |
| Bearing Material | Bearing Steel |
| Sealing | Sealed on Both Sides |
| Lubricant | Grease |
| Dimensions | |
| Bore Diameter (d) | 90 mm |
| Width (B) | 36 mm |
| Outer Diameter (D) | 125 mm |
| Contact Angle α (°) | 25 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 72.8 kN |
| Basic Static Load Rating C₀ (kN) | 96.5 kN |
| Material | |
| Weight (kg) | 1.14 kg |
S71918 ACD/P4ADBA 125 mm 90 mm 36 mm Frequently Asked Questions about S71918 ACD/P4ADBA Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To ensure optimum performance of CHG Bearing S71918 ACD/P4ADBA Super-precision Angular Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 90 mm bore. For the 125 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Every production batch of CHG Bearing S71918 ACD/P4ADBA Super-precision Angular Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
Sourcing S71918 ACD/P4ADBA directly from CHG Bearing eliminates intermediate brokerage markups while granting you factory-direct engineering backup, rigorous ISO-certified quality assurance, competitive volume wholesale pricing, and dependable supply chain stability for Super-precision Angular Contact Ball Bearings.
When fitting S71918 ACD/P4ADBA over a 90 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
