Manufactured by CHG Bearing, the S71917 CE/HCP4ADGA is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 85 mm bore diameter, a 120 mm outer diameter, and a 36 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
S71917 CE/HCP4ADGA - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | S71917 CE/HCP4ADGA |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Seal Type | Non-contact Seal |
| Number of Rows | 2 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-speed E Design |
| Universally Matchable | Yes – Back-to-back (DB), Face-to-face (DF), or Tandem (DT) |
| Matched Arrangement | Universal Matching |
| Number of Bearings in Set | 2 |
| Axial Clearance / Preload | Extra-light Preload |
| Tolerance Class | P4A |
| Bearing Material | Hybrid (Steel Rings / Ceramic Balls) |
| Sealing | Sealed on Both Sides |
| Lubricant | Grease |
| Dimensions | |
| Bore Diameter (d) | 85 mm |
| Width (B) | 36 mm |
| Outer Diameter (D) | 120 mm |
| Contact Angle α (°) | 15 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 48.8 kN |
| Basic Static Load Rating C₀ (kN) | 45.5 kN |
| Material | |
| Weight (kg) | 0.888 kg |
S71917 CE/HCP4ADGA 120 mm 85 mm 36 mm Frequently Asked Questions about S71917 CE/HCP4ADGA Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Non-contact Seal), CHG Bearing pre-charges S71917 CE/HCP4ADGA with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
Standard batches of CHG Bearing S71917 CE/HCP4ADGA conform strictly to ISO Class Normal (ABEC-1). For high-precision machine tool spindles, gearboxes, or robotics requiring tighter runouts, CHG Bearing can provide custom batches graded to ISO Class 6 (P6/ABEC-3) or ISO Class 5 (P5/ABEC-5) with 100% micrometer verification.
Every production batch of CHG Bearing S71917 CE/HCP4ADGA Super-precision Angular Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
When fitting S71917 CE/HCP4ADGA over a 85 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
