Manufactured by CHG Bearing, the S71915 ACE/P4ADGA is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 75 mm bore diameter, a 105 mm outer diameter, and a 32 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
S71915 ACE/P4ADGA - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | S71915 ACE/P4ADGA |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Seal Type | Non-contact Seal |
| Number of Rows | 2 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-speed E Design |
| Universally Matchable | Yes – Back-to-back (DB), Face-to-face (DF), or Tandem (DT) |
| Matched Arrangement | Universal Matching |
| Number of Bearings in Set | 2 |
| Axial Clearance / Preload | Extra-light Preload |
| Tolerance Class | P4A |
| Bearing Material | Bearing Steel |
| Sealing | Sealed on Both Sides |
| Lubricant | Grease |
| Dimensions | |
| Bore Diameter (d) | 75 mm |
| Width (B) | 32 mm |
| Outer Diameter (D) | 105 mm |
| Contact Angle α (°) | 25 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 34.5 kN |
| Basic Static Load Rating C₀ (kN) | 32 kN |
| Material | |
| Weight (kg) | 0.696 kg |
S71915 ACE/P4ADGA 105 mm 75 mm 32 mm Frequently Asked Questions about S71915 ACE/P4ADGA Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Engineered according to international ISO boundary plans, CHG Bearing supplies S71915 ACE/P4ADGA with a precision bore diameter (d) of 75 mm, an outside diameter (D) of 105 mm, and a nominal ring width (B) of 32 mm. This configuration yields an effective cross-sectional wall thickness of 15.0 mm and an envelope ratio (D/d) of 1.4, delivering compact rigidity for OEM machinery housings.
The CHG Bearing S71915 ACE/P4ADGA is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
To extend the trouble-free lifespan of CHG Bearing S71915 ACE/P4ADGA, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
To ensure optimum performance of CHG Bearing S71915 ACE/P4ADGA Super-precision Angular Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 75 mm bore. For the 105 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
