Manufactured by CHG Bearing, the S71911 CDGB/P4A is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 55 mm bore diameter, a 80 mm outer diameter, and a 13 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
S71911 CDGB/P4A - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | S71911 CDGB/P4A |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Seal Type | Non-contact Seal |
| Number of Rows | 1 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-capacity D Design |
| Universally Matchable | Yes – Back-to-back (DB), Face-to-face (DF), or Tandem (DT) |
| Axial Clearance / Preload | Preload Class B |
| Tolerance Class | P4A |
| Bearing Material | Bearing Steel |
| Sealing | Sealed on Both Sides |
| Lubricant | Grease |
| Dimensions | |
| Bore Diameter (d) | 55 mm |
| Width (B) | 13 mm |
| Outer Diameter (D) | 80 mm |
| Contact Angle α (°) | 15 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 19.5 kN |
| Basic Static Load Rating C₀ (kN) | 14.6 kN |
| Limiting Speed – Grease (r/min) | 16000 r/min |
| Material | |
| Weight (kg) | 0.185 kg |
S71911 CDGB/P4A 80 mm 55 mm 13 mm Frequently Asked Questions about S71911 CDGB/P4A Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Each S71911 CDGB/P4A produced in CHG Bearing manufacturing facilities features accurately profiled corner chamfers complying with DIN 5412 / ISO standard corner radii. When designing mating shafts and housing shoulders, machining an undercut or fillet radius strictly within the inner ring clearance limit (55 mm bore side) ensures perfect planar contact without edge binding.
The CHG Bearing S71911 CDGB/P4A is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Quality starts with raw material selection: CHG Bearing crafts S71911 CDGB/P4A inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
To ensure optimum performance of CHG Bearing S71911 CDGB/P4A Super-precision Angular Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 55 mm bore. For the 80 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
