Manufactured by CHG Bearing, the S71911 ACB/HCP4A is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 55 mm bore diameter, a 80 mm outer diameter, and a 13 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
S71911 ACB/HCP4A - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | S71911 ACB/HCP4A |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Seal Type | Non-contact Seal |
| Number of Rows | 1 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-speed B Design |
| Universally Matchable | No |
| Axial Clearance / Preload | Not Applicable |
| Tolerance Class | P4A |
| Bearing Material | Hybrid (Steel Rings / Ceramic Balls) |
| Sealing | Sealed on Both Sides |
| Lubricant | Grease |
| Dimensions | |
| Bore Diameter (d) | 55 mm |
| Width (B) | 13 mm |
| Outer Diameter (D) | 80 mm |
| Contact Angle α (°) | 25 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 9.36 kN |
| Basic Static Load Rating C₀ (kN) | 7.65 kN |
| Limiting Speed – Grease (r/min) | 24000 r/min |
| Material | |
| Weight (kg) | 0.177 kg |
S71911 ACB/HCP4A 80 mm 55 mm 13 mm Frequently Asked Questions about S71911 ACB/HCP4A Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
As standard production, CHG Bearing subjects S71911 ACB/HCP4A to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
To ensure optimum performance of CHG Bearing S71911 ACB/HCP4A Super-precision Angular Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 55 mm bore. For the 80 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
The Non-contact Seal engineered for S71911 ACB/HCP4A by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
In its sealed configuration (Non-contact Seal), CHG Bearing pre-charges S71911 ACB/HCP4A with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
