Manufactured by CHG Bearing, the S71910 ACE/P4ADT is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 50 mm bore diameter, a 72 mm outer diameter, and a 24 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
S71910 ACE/P4ADT - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | S71910 ACE/P4ADT |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Seal Type | Non-contact Seal |
| Number of Rows | 2 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-speed E Design |
| Universally Matchable | No |
| Matched Arrangement | Tandem (DT) |
| Number of Bearings in Set | 2 |
| Axial Clearance / Preload | Not Applicable |
| Tolerance Class | P4A |
| Bearing Material | Bearing Steel |
| Sealing | Sealed on Both Sides |
| Lubricant | Grease |
| Dimensions | |
| Bore Diameter (d) | 50 mm |
| Width (B) | 24 mm |
| Outer Diameter (D) | 72 mm |
| Contact Angle α (°) | 25 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 19.9 kN |
| Basic Static Load Rating C₀ (kN) | 16.3 kN |
| Material | |
| Weight (kg) | 0.255 kg |
S71910 ACE/P4ADT 72 mm 50 mm 24 mm Frequently Asked Questions about S71910 ACE/P4ADT Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
As standard production, CHG Bearing subjects S71910 ACE/P4ADT to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
In its sealed configuration (Non-contact Seal), CHG Bearing pre-charges S71910 ACE/P4ADT with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
The CHG Bearing S71910 ACE/P4ADT is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Yes, CHG Bearing works closely with industrial OEMs and brand distributors. We offer turnkey custom engineering for S71910 ACE/P4ADT, including laser-etched customer logos, custom internal radial clearances, specialized grease formulations, and bespoke protective packaging.
