Manufactured by CHG Bearing, the S71910 ACB/HCP4ADGA is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 50 mm bore diameter, a 72 mm outer diameter, and a 24 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
S71910 ACB/HCP4ADGA - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | S71910 ACB/HCP4ADGA |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Seal Type | Non-contact Seal |
| Number of Rows | 2 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-speed B Design |
| Universally Matchable | Yes – Back-to-back (DB), Face-to-face (DF), or Tandem (DT) |
| Matched Arrangement | Universal Matching |
| Number of Bearings in Set | 2 |
| Axial Clearance / Preload | Extra-light Preload |
| Tolerance Class | P4A |
| Bearing Material | Hybrid (Steel Rings / Ceramic Balls) |
| Sealing | Sealed on Both Sides |
| Lubricant | Grease |
| Dimensions | |
| Bore Diameter (d) | 50 mm |
| Width (B) | 24 mm |
| Outer Diameter (D) | 72 mm |
| Contact Angle α (°) | 25 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 11.9 kN |
| Basic Static Load Rating C₀ (kN) | 11.8 kN |
| Material | |
| Weight (kg) | 0.267 kg |
S71910 ACB/HCP4ADGA 72 mm 50 mm 24 mm Frequently Asked Questions about S71910 ACB/HCP4ADGA Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Non-contact Seal), CHG Bearing pre-charges S71910 ACB/HCP4ADGA with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
When fitting S71910 ACB/HCP4ADGA over a 50 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
As standard production, CHG Bearing subjects S71910 ACB/HCP4ADGA to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
Sourcing S71910 ACB/HCP4ADGA directly from CHG Bearing eliminates intermediate brokerage markups while granting you factory-direct engineering backup, rigorous ISO-certified quality assurance, competitive volume wholesale pricing, and dependable supply chain stability for Super-precision Angular Contact Ball Bearings.
