Manufactured by CHG Bearing, the S7012 CD/HCP4ADGA is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 60 mm bore diameter, a 95 mm outer diameter, and a 36 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
S7012 CD/HCP4ADGA - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | S7012 CD/HCP4ADGA |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Seal Type | Non-contact Seal |
| Number of Rows | 2 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-capacity D Design |
| Universally Matchable | Yes – Back-to-back (DB), Face-to-face (DF), or Tandem (DT) |
| Matched Arrangement | Universal Matching |
| Number of Bearings in Set | 2 |
| Axial Clearance / Preload | Extra-light Preload |
| Tolerance Class | P4A |
| Bearing Material | Hybrid (Steel Rings / Ceramic Balls) |
| Sealing | Sealed on Both Sides |
| Lubricant | Grease |
| Dimensions | |
| Bore Diameter (d) | 60 mm |
| Width (B) | 36 mm |
| Outer Diameter (D) | 95 mm |
| Contact Angle α (°) | 15 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 66.3 kN |
| Basic Static Load Rating C₀ (kN) | 69.5 kN |
| Material | |
| Weight (kg) | 0.67 kg |
S7012 CD/HCP4ADGA 95 mm 60 mm 36 mm Frequently Asked Questions about S7012 CD/HCP4ADGA Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Each S7012 CD/HCP4ADGA produced in CHG Bearing manufacturing facilities features accurately profiled corner chamfers complying with DIN 5412 / ISO standard corner radii. When designing mating shafts and housing shoulders, machining an undercut or fillet radius strictly within the inner ring clearance limit (60 mm bore side) ensures perfect planar contact without edge binding.
The CHG Bearing S7012 CD/HCP4ADGA is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Every production batch of CHG Bearing S7012 CD/HCP4ADGA Super-precision Angular Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
When fitting S7012 CD/HCP4ADGA over a 60 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
