Manufactured by CHG Bearing, the S7008 ACE/P4ADT is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 40 mm bore diameter, a 68 mm outer diameter, and a 30 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
S7008 ACE/P4ADT - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | S7008 ACE/P4ADT |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Seal Type | Non-contact Seal |
| Number of Rows | 2 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-speed E Design |
| Universally Matchable | No |
| Matched Arrangement | Tandem (DT) |
| Number of Bearings in Set | 2 |
| Axial Clearance / Preload | Not Applicable |
| Tolerance Class | P4A |
| Bearing Material | Bearing Steel |
| Sealing | Sealed on Both Sides |
| Lubricant | Grease |
| Dimensions | |
| Bore Diameter (d) | 40 mm |
| Width (B) | 30 mm |
| Outer Diameter (D) | 68 mm |
| Contact Angle α (°) | 25 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 19 kN |
| Basic Static Load Rating C₀ (kN) | 14.3 kN |
| Material | |
| Weight (kg) | 0.388 kg |
S7008 ACE/P4ADT 68 mm 40 mm 30 mm Frequently Asked Questions about S7008 ACE/P4ADT Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Quality starts with raw material selection: CHG Bearing crafts S7008 ACE/P4ADT inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
Standard batches of CHG Bearing S7008 ACE/P4ADT conform strictly to ISO Class Normal (ABEC-1). For high-precision machine tool spindles, gearboxes, or robotics requiring tighter runouts, CHG Bearing can provide custom batches graded to ISO Class 6 (P6/ABEC-3) or ISO Class 5 (P5/ABEC-5) with 100% micrometer verification.
Built for demanding industrial environments, the S7008 ACE/P4ADT Super-precision Angular Contact Ball Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
When fitting S7008 ACE/P4ADT over a 40 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
