Manufactured by CHG Bearing, the S7004 CE/HCP4ADBA is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 20 mm bore diameter, a 42 mm outer diameter, and a 24 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
S7004 CE/HCP4ADBA - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | S7004 CE/HCP4ADBA |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Seal Type | Non-contact Seal |
| Number of Rows | 2 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-speed E Design |
| Universally Matchable | No |
| Matched Arrangement | Back-to-back (DB) |
| Number of Bearings in Set | 2 |
| Axial Clearance / Preload | Extra-light Preload |
| Tolerance Class | P4A |
| Bearing Material | Hybrid (Steel Rings / Ceramic Balls) |
| Sealing | Sealed on Both Sides |
| Lubricant | Grease |
| Dimensions | |
| Bore Diameter (d) | 20 mm |
| Width (B) | 24 mm |
| Outer Diameter (D) | 42 mm |
| Contact Angle α (°) | 15 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 12.1 kN |
| Basic Static Load Rating C₀ (kN) | 6.7 kN |
| Material | |
| Weight (kg) | 0.119 kg |
S7004 CE/HCP4ADBA 42 mm 20 mm 24 mm Frequently Asked Questions about S7004 CE/HCP4ADBA Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Yes, CHG Bearing works closely with industrial OEMs and brand distributors. We offer turnkey custom engineering for S7004 CE/HCP4ADBA, including laser-etched customer logos, custom internal radial clearances, specialized grease formulations, and bespoke protective packaging.
In its sealed configuration (Non-contact Seal), CHG Bearing pre-charges S7004 CE/HCP4ADBA with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To ensure optimum performance of CHG Bearing S7004 CE/HCP4ADBA Super-precision Angular Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 20 mm bore. For the 42 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
When fitting S7004 CE/HCP4ADBA over a 20 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
