Manufactured by CHG Bearing, the 7207 CD/P4ADT is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 35 mm bore diameter, a 72 mm outer diameter, and a 34 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
7207 CD/P4ADT - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 7207 CD/P4ADT |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Number of Rows | 2 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-capacity D Design |
| Universally Matchable | No |
| Matched Arrangement | Tandem (DT) |
| Number of Bearings in Set | 2 |
| Axial Clearance / Preload | Not Applicable |
| Tolerance Class | P4A |
| Bearing Material | Bearing Steel |
| Sealing | Open |
| Dimensions | |
| Bore Diameter (d) | 35 mm |
| Width (B) | 34 mm |
| Outer Diameter (D) | 72 mm |
| Contact Angle α (°) | 15 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 52 kN |
| Basic Static Load Rating C₀ (kN) | 43 kN |
| Material | |
| Weight (kg) | 0.564 kg |
7207 CD/P4ADT 72 mm 35 mm 34 mm Frequently Asked Questions about 7207 CD/P4ADT Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
When fitting 7207 CD/P4ADT over a 35 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
Standard batches of CHG Bearing 7207 CD/P4ADT conform strictly to ISO Class Normal (ABEC-1). For high-precision machine tool spindles, gearboxes, or robotics requiring tighter runouts, CHG Bearing can provide custom batches graded to ISO Class 6 (P6/ABEC-3) or ISO Class 5 (P5/ABEC-5) with 100% micrometer verification.
The CHG Bearing 7207 CD/P4ADT is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
In its sealed configuration (Open Type), CHG Bearing pre-charges 7207 CD/P4ADT with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
