Manufactured by CHG Bearing, the 7040 ACD/P4A is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 200 mm bore diameter, a 310 mm outer diameter, and a 51 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
7040 ACD/P4A - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 7040 ACD/P4A |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Number of Rows | 1 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-capacity D Design |
| Universally Matchable | No |
| Axial Clearance / Preload | Not Applicable |
| Tolerance Class | P4A |
| Bearing Material | Bearing Steel |
| Sealing | Open |
| Dimensions | |
| Bore Diameter (d) | 200 mm |
| Width (B) | 51 mm |
| Outer Diameter (D) | 310 mm |
| Contact Angle α (°) | 25 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 281 kN |
| Basic Static Load Rating C₀ (kN) | 365 kN |
| Limiting Speed – Grease (r/min) | 4000 r/min |
| Limiting Speed – Oil-air (r/min) | 6000 r/min |
| Material | |
| Weight (kg) | 12.1 kg |
7040 ACD/P4A 310 mm 200 mm 51 mm Frequently Asked Questions about 7040 ACD/P4A Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Built for demanding industrial environments, the 7040 ACD/P4A Super-precision Angular Contact Ball Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
When fitting 7040 ACD/P4A over a 200 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To match diverse operational dynamics, CHG Bearing supplies 7040 ACD/P4A with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
In its sealed configuration (Open Type), CHG Bearing pre-charges 7040 ACD/P4A with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
