Manufactured by CHG Bearing, the 7016 ACEGA/HCP4A is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 80 mm bore diameter, a 125 mm outer diameter, and a 22 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
7016 ACEGA/HCP4A - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 7016 ACEGA/HCP4A |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Number of Rows | 1 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-speed E Design |
| Universally Matchable | Yes – Back-to-back (DB), Face-to-face (DF), or Tandem (DT) |
| Axial Clearance / Preload | Preload Class A |
| Tolerance Class | P4A |
| Bearing Material | Hybrid (Steel Rings / Ceramic Balls) |
| Sealing | Open |
| Dimensions | |
| Bore Diameter (d) | 80 mm |
| Width (B) | 22 mm |
| Outer Diameter (D) | 125 mm |
| Contact Angle α (°) | 25 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 32.5 kN |
| Basic Static Load Rating C₀ (kN) | 26.5 kN |
| Material | |
| Weight (kg) | 0.777 kg |
7016 ACEGA/HCP4A 125 mm 80 mm 22 mm Frequently Asked Questions about 7016 ACEGA/HCP4A Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Yes, 100% of 7016 ACEGA/HCP4A Super-precision Angular Contact Ball Bearings leaving CHG Bearing production lines are subjected to multi-frequency Anderometer sound testing. All units satisfy baseline Z1V1 levels, with dedicated quiet-running electric motor quality (EMQ) lots certified to Z2V2 and Z3V3 standards for silent machinery integration.
In its sealed configuration (Open Type), CHG Bearing pre-charges 7016 ACEGA/HCP4A with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To match diverse operational dynamics, CHG Bearing supplies 7016 ACEGA/HCP4A with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
When fitting 7016 ACEGA/HCP4A over a 80 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
