Manufactured by CHG Bearing, the 7010 ACDGA/HCP4AL is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 50 mm bore diameter, a 80 mm outer diameter, and a 16 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
7010 ACDGA/HCP4AL - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 7010 ACDGA/HCP4AL |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Number of Rows | 1 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-capacity D Design |
| Universally Matchable | Yes – Back-to-back (DB), Face-to-face (DF), or Tandem (DT) |
| Axial Clearance / Preload | Preload Class A |
| Tolerance Class | P4A |
| Bearing Material | Hybrid (Steel Rings / Ceramic Balls) |
| Sealing | Open |
| Features | Suitable for Direct Oil-air Lubrication |
| Dimensions | |
| Bore Diameter (d) | 50 mm |
| Width (B) | 16 mm |
| Outer Diameter (D) | 80 mm |
| Contact Angle α (°) | 25 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 28.1 kN |
| Basic Static Load Rating C₀ (kN) | 23.2 kN |
| Material | |
| Weight (kg) | 0.212 kg |
7010 ACDGA/HCP4AL 80 mm 50 mm 16 mm Frequently Asked Questions about 7010 ACDGA/HCP4AL Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The CHG Bearing 7010 ACDGA/HCP4AL is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
To extend the trouble-free lifespan of CHG Bearing 7010 ACDGA/HCP4AL, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
When fitting 7010 ACDGA/HCP4AL over a 50 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
Each 7010 ACDGA/HCP4AL produced in CHG Bearing manufacturing facilities features accurately profiled corner chamfers complying with DIN 5412 / ISO standard corner radii. When designing mating shafts and housing shoulders, machining an undercut or fillet radius strictly within the inner ring clearance limit (50 mm bore side) ensures perfect planar contact without edge binding.
