Manufactured by CHG Bearing, the 7005 CE/P4ADBA is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 25 mm bore diameter, a 47 mm outer diameter, and a 24 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
7005 CE/P4ADBA - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 7005 CE/P4ADBA |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Number of Rows | 2 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-speed E Design |
| Universally Matchable | No |
| Matched Arrangement | Back-to-back (DB) |
| Number of Bearings in Set | 2 |
| Axial Clearance / Preload | Extra-light Preload |
| Tolerance Class | P4A |
| Bearing Material | Bearing Steel |
| Sealing | Open |
| Dimensions | |
| Bore Diameter (d) | 25 mm |
| Width (B) | 24 mm |
| Outer Diameter (D) | 47 mm |
| Contact Angle α (°) | 15 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 13.5 kN |
| Basic Static Load Rating C₀ (kN) | 8.3 kN |
| Material | |
| Weight (kg) | 0.149 kg |
7005 CE/P4ADBA 47 mm 25 mm 24 mm Frequently Asked Questions about 7005 CE/P4ADBA Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Built for demanding industrial environments, the 7005 CE/P4ADBA Super-precision Angular Contact Ball Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
In its sealed configuration (Open Type), CHG Bearing pre-charges 7005 CE/P4ADBA with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To safeguard CHG Bearing 7005 CE/P4ADBA against fretting wear and false brinelling during transport or vibration, assemble mating surfaces (25 mm x 47 mm) using anti-fretting mounting paste. Maintaining strict alignment and avoiding prolonged static vibration will preserve raceway polish.
The CHG Bearing 7005 CE/P4ADBA is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
