Manufactured by CHG Bearing, the 7001 CD/P4ADBA is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 12 mm bore diameter, a 28 mm outer diameter, and a 16 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
7001 CD/P4ADBA - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 7001 CD/P4ADBA |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Number of Rows | 2 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-capacity D Design |
| Universally Matchable | No |
| Matched Arrangement | Back-to-back (DB) |
| Number of Bearings in Set | 2 |
| Axial Clearance / Preload | Extra-light Preload |
| Tolerance Class | P4A |
| Bearing Material | Bearing Steel |
| Sealing | Open |
| Dimensions | |
| Bore Diameter (d) | 12 mm |
| Width (B) | 16 mm |
| Outer Diameter (D) | 28 mm |
| Contact Angle α (°) | 15 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 7.28 kN |
| Basic Static Load Rating C₀ (kN) | 3.8 kN |
| Material | |
| Weight (kg) | 0.042 kg |
7001 CD/P4ADBA 28 mm 12 mm 16 mm Frequently Asked Questions about 7001 CD/P4ADBA Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To match diverse operational dynamics, CHG Bearing supplies 7001 CD/P4ADBA with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
In its sealed configuration (Open Type), CHG Bearing pre-charges 7001 CD/P4ADBA with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To extend the trouble-free lifespan of CHG Bearing 7001 CD/P4ADBA, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
The CHG Bearing 7001 CD/P4ADBA is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
