Manufactured by CHG Bearing, the 7000 CDGA/P4A is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 10 mm bore diameter, a 26 mm outer diameter, and a 8 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
7000 CDGA/P4A - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 7000 CDGA/P4A |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Number of Rows | 1 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-capacity D Design |
| Universally Matchable | Yes – Back-to-back (DB), Face-to-face (DF), or Tandem (DT) |
| Axial Clearance / Preload | Preload Class A |
| Tolerance Class | P4A |
| Bearing Material | Bearing Steel |
| Sealing | Open |
| Dimensions | |
| Bore Diameter (d) | 10 mm |
| Width (B) | 8 mm |
| Outer Diameter (D) | 26 mm |
| Contact Angle α (°) | 15 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 4.1 kN |
| Basic Static Load Rating C₀ (kN) | 1.66 kN |
| Material | |
| Weight (kg) | 0.019 kg |
7000 CDGA/P4A 26 mm 10 mm 8 mm Frequently Asked Questions about 7000 CDGA/P4A Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Built for demanding industrial environments, the 7000 CDGA/P4A Super-precision Angular Contact Ball Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
To extend the trouble-free lifespan of CHG Bearing 7000 CDGA/P4A, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
The CHG Bearing 7000 CDGA/P4A is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
When fitting 7000 CDGA/P4A over a 10 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
