Manufactured by CHG Bearing, the 162.20.0544.00.00.10 is a precision Four-Point Contact Ball Slewing Bearings. Key dimensional parameters include a 445 mm bore diameter, a 648 mm outer diameter, and a 56 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
162.20.0544.00.00.10 - Four-Point Contact Ball Slewing Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 162.20.0544.00.00.10 |
| Brand | CHG® |
| Gear Type | Internal Gear |
| Characteristics | |
| Bearing Type | Single-row Four-point Contact Ball Slewing Bearing |
| Row Configuration | Single-row |
| Dimensions | |
| Bore Diameter (d) | 445 mm |
| Width (B) | 56 mm |
| Outer Diameter (D) | 648 mm |
| Number of Lubrication Holes n1 | 4 |
| Mounting Dimensions | |
| Outer Ring Mounting Hole P.C.D. D1 | 620 mm |
| Inner Ring Mounting Hole P.C.D. D2 | 505 mm |
| Lubrication Port Thread / Size Φ1 | 8 |
| Inner Ring Mounting Hole Count n2 | 16 |
| Inner Ring Mounting Hole Specification Φ2 (Ø / Thread) | 12 |
| Outer Ring Mounting Hole Count n3 | 10 |
| Outer Ring Mounting Hole Specification Φ3 (Ø / Thread) | 18 |
| Gear Data | |
| Gear Module m | 6 mm |
| Gear Tip Diameter De | 456 mm |
| Number of Gear Teeth z | 76 |
| Gear Face Width b | 44.5 mm |
| Addendum Modification Coefficient x | 0 |
| Reference Data | |
| Reference Mass (kg) | 39.5 kg |
162.20.0544.00.00.10 648 mm 445 mm 620 mm 505 mm 56 mm Frequently Asked Questions about 162.20.0544.00.00.10 Four-Point Contact Ball Slewing Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To match diverse operational dynamics, CHG Bearing supplies 162.20.0544.00.00.10 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
To ensure optimum performance of CHG Bearing 162.20.0544.00.00.10 Four-Point Contact Ball Slewing Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 445 mm bore. For the 648 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Built for demanding industrial environments, the 162.20.0544.00.00.10 Four-Point Contact Ball Slewing Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
When fitting 162.20.0544.00.00.10 over a 445 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
