Manufactured by CHG Bearing, the 3-944G2K1 is a precision Crossed Roller Slewing Bearings. Key dimensional parameters include a 1412 mm bore diameter, a 1680 mm outer diameter, and a 185 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
3-944G2K1 - Crossed Roller Slewing Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 3-944G2K1 |
| Brand | CHG® |
| Gear Type | External Gear |
| Characteristics | |
| Bearing Type | Single-row Crossed Roller Slewing Bearing |
| Row Configuration | Single-row |
| Dimensions | |
| Bore Diameter (d) | 1412 mm |
| Width (B) | 185 mm |
| Outer Diameter (D) | 1680 mm |
| Inner/Outer Ring Height H1 | 170 mm |
| End-face Height Difference h | 40 mm |
| Number of Lubrication Holes n1 | 2 |
| Mounting Dimensions | |
| Inner Ring Mounting Hole P.C.D. D2 | 1460 mm |
| Lubrication Port Thread / Size Φ1 | 12 |
| Inner Ring Mounting Hole Count n2 | 24 |
| Inner Ring Mounting Hole Specification Φ2 (Ø / Thread) | 18 |
| Reference Data | |
| Reference Mass (kg) | 759 kg |
3-944G2K1 1680 mm 1412 mm 185 mm mm 1460 mm Frequently Asked Questions about 3-944G2K1 Crossed Roller Slewing Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The Open Type engineered for 3-944G2K1 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
When fitting 3-944G2K1 over a 1412 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To extend the trouble-free lifespan of CHG Bearing 3-944G2K1, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
To match diverse operational dynamics, CHG Bearing supplies 3-944G2K1 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
