Manufactured by CHG Bearing, the DHK.07.0062 is a precision Single Row Tapered Roller Bearings. Key dimensional parameters include a 385.762 mm bore diameter, a 514.35 mm outer diameter, and a N/A mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
DHK.07.0062 - Single Row Tapered Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | DHK.07.0062 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Single Row Tapered Roller Bearing |
| Number of Rows | Single Row |
| Tolerance Class | Class 4 |
| Dimensions | |
| Bore Diameter (d) | 385.762 mm |
| Width (B) | N/A mm |
| Outer Diameter (D) | 514.35 mm |
| Outer Ring Width C | 63.5 mm |
| Bore Diameter Tolerance | 0 – +0.051 mm |
| Outside Diameter Tolerance | 0 – +0.051 mm |
| Inner Ring Chamfer | 6.4 min mm |
| Outer Ring Chamfer | 6.4 min mm |
| Shaft Abutment Diameter | N/A mm |
| Housing Abutment Diameter | N/A mm |
| Overall Bearing Width Tolerance | N/A mm |
| Inner Ring Width B | 82.55 mm |
| Inner Ring Width Tolerance | N/A mm |
| Outer Ring Width Tolerance | N/A mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 1100 kN |
| Basic Static Load Rating C0 (kN) | 2450 kN |
| Material | |
| Mass (kg) | 51 kg |
| Ring Material | Case-Hardened Steel / Bearing Steel |
| Rolling Element Material | Case-Hardened Steel / Bearing Steel |
| Cage Material | 08Al Steel |
DHK.07.0062 514.35 mm 385.762 mm N/A mm Frequently Asked Questions about DHK.07.0062 Single Row Tapered Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Every production batch of CHG Bearing DHK.07.0062 Single Row Tapered Roller Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
Quality starts with raw material selection: CHG Bearing crafts DHK.07.0062 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
Following standard ISO 281 fatigue calculation guidelines, the nominal rating life (L10) of CHG Bearing DHK.07.0062 correlates its dynamic capacity (standard dynamic) with equivalent dynamic loads. In controlled industrial settings with proper contamination-free filtration, field data confirms continuous operational longevity exceeding 20,000 to 50,000 service hours.
In its sealed configuration (Open Type), CHG Bearing pre-charges DHK.07.0062 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
