Manufactured by CHG Bearing, the 32048P5 is a precision Single Row Tapered Roller Bearings. Key dimensional parameters include a 240 mm bore diameter, a 360 mm outer diameter, and a N/A mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
32048P5 - Single Row Tapered Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 32048P5 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Single Row Tapered Roller Bearing |
| Number of Rows | Single Row |
| Tolerance Class | P5 |
| Dimensions | |
| Bore Diameter (d) | 240 mm |
| Width (B) | N/A mm |
| Outer Diameter (D) | 360 mm |
| Outer Ring Width C | 57 mm |
| Bore Diameter Tolerance | -0.022 – 0 mm |
| Outside Diameter Tolerance | -0.028 – 0 mm |
| Inner Ring Chamfer | 4 min mm |
| Outer Ring Chamfer | 3 min mm |
| Shaft Abutment Diameter | 254 mm |
| Housing Abutment Diameter | 318 mm |
| Overall Bearing Width Tolerance | N/A mm |
| Inner Ring Width B | 76 mm |
| Inner Ring Width Tolerance | -0.60 – 0 mm |
| Outer Ring Width Tolerance | -0.60 – 0 mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 850 kN |
| Basic Static Load Rating C0 (kN) | 1560 kN |
| Material | |
| Mass (kg) | 20.4 kg |
| Ring Material | Bearing Steel |
| Rolling Element Material | Case-Hardened Steel / Bearing Steel |
| Cage Material | Grade 10 Steel |
32048P5 360 mm 240 mm N/A mm Frequently Asked Questions about 32048P5 Single Row Tapered Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
As standard production, CHG Bearing subjects 32048P5 to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
In its sealed configuration (Open Type), CHG Bearing pre-charges 32048P5 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To extend the trouble-free lifespan of CHG Bearing 32048P5, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
When fitting 32048P5 over a 240 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
