Manufactured by CHG Bearing, the 30232P5 is a precision Single Row Tapered Roller Bearings. Key dimensional parameters include a 160 mm bore diameter, a 290 mm outer diameter, and a N/A mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
30232P5 - Single Row Tapered Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 30232P5 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Single Row Tapered Roller Bearing |
| Number of Rows | Single Row |
| Tolerance Class | P5 |
| Dimensions | |
| Bore Diameter (d) | 160 mm |
| Width (B) | N/A mm |
| Outer Diameter (D) | 290 mm |
| Outer Ring Width C | 40 mm |
| Bore Diameter Tolerance | -0.018 – 0 mm |
| Outside Diameter Tolerance | -0.025 – 0 mm |
| Inner Ring Chamfer | 4 min mm |
| Outer Ring Chamfer | 3 min mm |
| Shaft Abutment Diameter | 175 mm |
| Housing Abutment Diameter | 265 mm |
| Overall Bearing Width Tolerance | N/A mm |
| Inner Ring Width B | 48 mm |
| Inner Ring Width Tolerance | -0.50 – 0 mm |
| Outer Ring Width Tolerance | -0.50 – 0 mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 428 kN |
| Basic Static Load Rating C0 (kN) | 613 kN |
| Material | |
| Mass (kg) | 13.2 kg |
| Ring Material | Bearing Steel |
| Rolling Element Material | Case-Hardened Steel / Bearing Steel |
| Cage Material | 08Al Steel |
30232P5 290 mm 160 mm N/A mm Frequently Asked Questions about 30232P5 Single Row Tapered Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Open Type), CHG Bearing pre-charges 30232P5 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To ensure optimum performance of CHG Bearing 30232P5 Single Row Tapered Roller Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 160 mm bore. For the 290 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Built for demanding industrial environments, the 30232P5 Single Row Tapered Roller Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
The CHG Bearing 30232P5 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
