Manufactured by CHG Bearing, the 47TS483434-1WSGFCS150 is a precision Four-Row Tapered Roller Bearings. Key dimensional parameters include a 240 mm bore diameter, a 338 mm outer diameter, and a 340 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
47TS483434-1WSGFCS150 - Four-Row Tapered Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 47TS483434-1WSGFCS150 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Four Row Tapered Roller Bearing |
| Number of Rows | Four Row |
| Tolerance Class | P0 |
| Dimensions | |
| Bore Diameter (d) | 240 mm |
| Width (B) | 340 mm |
| Outer Diameter (D) | 338 mm |
| Bore Diameter Tolerance | -0.03 – 0 mm |
| Outside Diameter Tolerance | -0.04 – 0 mm |
| Inner Ring Chamfer | N/A mm |
| Outer Ring Chamfer | 3 min mm |
| Inner Ring Assembly Width Tolerance | -0.2 – +0.2 mm |
| Outer Ring Assembly Width | 340 mm |
| Outer Ring Assembly Width Tolerance | -0.2 – +0.2 mm |
| Shaft Abutment Diameter | N/A mm |
| Housing Abutment Diameter | N/A mm |
| Lubrication Hole Diameter | N/A mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 2020 kN |
| Basic Static Load Rating C0 (kN) | 5360 kN |
| Material | |
| Mass (kg) | N/A kg |
| Ring Material | Case-Hardened Steel / Bearing Steel |
| Rolling Element Material | Case-Hardened Steel / Bearing Steel |
| Cage Material | Grade 45 Steel |
| Lubrication Groove Width | N/A mm |
47TS483434-1WSGFCS150 338 mm 240 mm 340 mm Frequently Asked Questions about 47TS483434-1WSGFCS150 Four-Row Tapered Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Yes, 100% of 47TS483434-1WSGFCS150 Four-Row Tapered Roller Bearings leaving CHG Bearing production lines are subjected to multi-frequency Anderometer sound testing. All units satisfy baseline Z1V1 levels, with dedicated quiet-running electric motor quality (EMQ) lots certified to Z2V2 and Z3V3 standards for silent machinery integration.
When fitting 47TS483434-1WSGFCS150 over a 240 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
The CHG Bearing 47TS483434-1WSGFCS150 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
In its sealed configuration (Open Type), CHG Bearing pre-charges 47TS483434-1WSGFCS150 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
