Manufactured by CHG Bearing, the QJ1034M is a precision Four-Point Contact Ball Bearings. Key dimensional parameters include a 170 mm bore diameter, a 260 mm outer diameter, and a 42 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
QJ1034M - Four-Point Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | QJ1034M |
| Brand | CHG® |
| Construction | Single Row |
| Characteristics | |
| Bearing Type | Four-Point Contact Ball Bearing |
| Series | QJ |
| Load Direction | Combined |
| Dimensions | |
| Bore Diameter (d) | 170 mm |
| Width (B) | 42 mm |
| Outer Diameter (D) | 260 mm |
| Chamfer Dimension r (min.) | 2.1 mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 296 kN |
| Basic Static Load Rating C0 (kN) | 428 kN |
| Material | |
| Mass (kg) | 8.76 kg |
| Cage Material | Bronze |
QJ1034M 260 mm 170 mm 42 mm Frequently Asked Questions about QJ1034M Four-Point Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The Open Type engineered for QJ1034M by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
To ensure optimum performance of CHG Bearing QJ1034M Four-Point Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 170 mm bore. For the 260 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Every production batch of CHG Bearing QJ1034M Four-Point Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
In its sealed configuration (Open Type), CHG Bearing pre-charges QJ1034M with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
