Manufactured by CHG Bearing, the 61938MB is a precision Deep Groove Ball Bearings. Key dimensional parameters include a 190 mm bore diameter, a 260 mm outer diameter, and a 33 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
61938MB - Deep Groove Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 61938MB |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Seal Type | Open |
| Number of Rows | Single Row |
| Tolerance Class | P5 |
| Load Direction | Radial |
| Dimensions | |
| Bore Diameter (d) | 190 mm |
| Width (B) | 33 mm |
| Outer Diameter (D) | 260 mm |
| Bore Diameter Tolerance | -0.015 – 0 mm |
| Outside Diameter Tolerance | -0.018 – 0 mm |
| Width Tolerance | -0.3 – 0 mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 117 kN |
| Basic Static Load Rating C0 (kN) | 133 kN |
| Material | |
| Mass (kg) | 5.15 kg |
| Ring Material | Bearing Steel |
| Cage Material | Brass |
| Ball Material | Bearing Steel |
61938MB 260 mm 190 mm 33 mm Frequently Asked Questions about 61938MB Deep Groove Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To safeguard CHG Bearing 61938MB against fretting wear and false brinelling during transport or vibration, assemble mating surfaces (190 mm x 260 mm) using anti-fretting mounting paste. Maintaining strict alignment and avoiding prolonged static vibration will preserve raceway polish.
When fitting 61938MB over a 190 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
Quality starts with raw material selection: CHG Bearing crafts 61938MB inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
In its sealed configuration (Open), CHG Bearing pre-charges 61938MB with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
