Manufactured by CHG Bearing, the 61922 is a precision Deep Groove Ball Bearings. Key dimensional parameters include a 110 mm bore diameter, a 150 mm outer diameter, and a 20 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
61922 - Deep Groove Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 61922 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Seal Type | Open |
| Number of Rows | Single Row |
| Tolerance Class | P5 |
| Load Direction | Radial |
| Dimensions | |
| Bore Diameter (d) | 110 mm |
| Width (B) | 20 mm |
| Outer Diameter (D) | 150 mm |
| Bore Diameter Tolerance | -0.01 – 0 mm |
| Outside Diameter Tolerance | -0.013 – 0 mm |
| Width Tolerance | -0.2 – 0 mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 43.6 kN |
| Basic Static Load Rating C0 (kN) | 44.4 kN |
| Material | |
| Mass (kg) | 0.846 kg |
| Ring Material | Bearing Steel |
| Cage Material | Grade 10 Steel |
| Ball Material | Bearing Steel |
61922 150 mm 110 mm 20 mm Frequently Asked Questions about 61922 Deep Groove Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Every production batch of CHG Bearing 61922 Deep Groove Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
Sourcing 61922 directly from CHG Bearing eliminates intermediate brokerage markups while granting you factory-direct engineering backup, rigorous ISO-certified quality assurance, competitive volume wholesale pricing, and dependable supply chain stability for Deep Groove Ball Bearings.
When fitting 61922 over a 110 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
The CHG Bearing 61922 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
