Manufactured by CHG Bearing, the 60/710F1 is a precision Deep Groove Ball Bearings. Key dimensional parameters include a 710 mm bore diameter, a 1030 mm outer diameter, and a 140 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
60/710F1 - Deep Groove Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 60/710F1 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Seal Type | Open |
| Number of Rows | Single Row |
| Tolerance Class | P5 |
| Load Direction | Radial |
| Dimensions | |
| Bore Diameter (d) | 710 mm |
| Width (B) | 140 mm |
| Outer Diameter (D) | 1030 mm |
| Bore Diameter Tolerance | -0.04 – 0 mm |
| Outside Diameter Tolerance | -0.05 – 0 mm |
| Width Tolerance | -0.75 – 0 mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 935 kN |
| Basic Static Load Rating C0 (kN) | 2190 kN |
| Material | |
| Mass (kg) | 402 kg |
| Ring Material | Bearing Steel |
| Cage Material | Grade 40 Steel |
| Ball Material | Bearing Steel |
60/710F1 1030 mm 710 mm 140 mm Frequently Asked Questions about 60/710F1 Deep Groove Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Standard batches of CHG Bearing 60/710F1 conform strictly to ISO Class Normal (ABEC-1). For high-precision machine tool spindles, gearboxes, or robotics requiring tighter runouts, CHG Bearing can provide custom batches graded to ISO Class 6 (P6/ABEC-3) or ISO Class 5 (P5/ABEC-5) with 100% micrometer verification.
To ensure optimum performance of CHG Bearing 60/710F1 Deep Groove Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 710 mm bore. For the 1030 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
The CHG Bearing 60/710F1 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Every production batch of CHG Bearing 60/710F1 Deep Groove Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
