Manufactured by CHG Bearing, the 6032E is a precision Deep Groove Ball Bearings. Key dimensional parameters include a 160 mm bore diameter, a 240 mm outer diameter, and a 38 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
6032E - Deep Groove Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 6032E |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Seal Type | Open |
| Number of Rows | Single Row |
| Tolerance Class | P5 |
| Load Direction | Radial |
| Dimensions | |
| Bore Diameter (d) | 160 mm |
| Width (B) | 38 mm |
| Outer Diameter (D) | 240 mm |
| Bore Diameter Tolerance | -0.013 – 0 mm |
| Outside Diameter Tolerance | -0.015 – 0 mm |
| Width Tolerance | -0.25 – 0 mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 137 kN |
| Basic Static Load Rating C0 (kN) | 135 kN |
| Material | |
| Mass (kg) | 6 kg |
| Ring Material | Bearing Steel |
| Cage Material | Brass |
| Ball Material | Bearing Steel |
6032E 240 mm 160 mm 38 mm Frequently Asked Questions about 6032E Deep Groove Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Every production batch of CHG Bearing 6032E Deep Groove Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
The Open engineered for 6032E by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
When fitting 6032E over a 160 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
As standard production, CHG Bearing subjects 6032E to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
